LG DX2343 Owner's Manual page 11

CAUTION
Connect the input sig-
y
nal cable and turn in the
direction of the arrow. To
prevent disconnection
secure the cable tightly.
Do not press on the screen for a prolonged
y
time. This may cause image distortion.
Do not display a still image on the screen
y
for a prolonged time. This may cause image
retention. Use a screensaver if possible.
NOTE
If you want to connect two computers to the
y
monitor, connect signal cables (D-SUB/DVI-
D/HDMI) to each computer.
When using D-SUB or DVI input, earphones
y
cannot be used to play sound. Instead, con-
nect speakers to your PC's audio output.
When connecting the power cord to the out-
y
let, use a grounded (3-hole) multi-socket or a
grounded wall outlet.
The monitor may flicker when turned on in an
y
area of low temperature. This is normal.
Sometimes red, green, or blue spots may ap-
y
pear on the screen. This is normal.
USING THE MONITOR SET
Self Image Adjustment
Press the power button to turn on the monitor.
When the power is on, the "Self Image Adjustment"
function automatically operates (only available for
analog signals).
NOTE
Self Image Adjustment
y
This function runs when the monitor is
connected for the first time and performs
automatic image adjustment for each signal
to provide an optimal screen display (only
available for analog signals).
AUTO
y
The Auto Image Adjustment option allows
you to improve the picture quality if the
screen is dimmed, if the text appears blurred
or too wide, if the screen flickers or if the
display area is not centered after adjusting
the resolution. (Only available for analog
signals).
11