Acer Aspire E1 Series User Manual page 79

point/router for detailed setup instructions.
Network cable (RJ45)
A network cable (also called RJ45 cable) is used to connect the host
computer to the access point (see illustration below); this type of cable
may also be used to connect peripheral devices to the access point.
Wireless adapter
An internal wireless adapter is normally already installed in your
computer. A button or controls in Windows allow you to activate
or deactivate the adapter.
Diagram of a working network
1. Access point/router
2. Desktop computer
3. Modem
4. Printer
5. Portable computer
6. PDA/Smartphone
7. Network cables (RJ45)
Turning on/off a wireless network connection
Most computers feature a 'Wi-Fi' button that turns the network Most computers feature a 'Wi-Fi' button that turns the network Most computers feature a 'Wi-Fi' button that turns the network
connection on or off. If your computer has wireless access, but does connection on or off. If your computer has wireless access, but does connection on or off. If your computer has wireless access, but does
not feature a Communication button, you may turn your wireless
network on or off, or control what is shared over the network with the network on or off, or control what is shared over the network with the network on or off, or control what is shared over the network with the
network management options. Press the Windows key ( ) + W, type network management options. Press the Windows key ( ) + W, type network management options. Press the Windows key ( ) + W, type
"HomeGroup" and then click on HomeGroup.
Warning
Using wireless devices while flying in aircraft is prohibited. Switch off
all devices before boarding an aircraft; they may be dangerous to the
operation of the aircraft, disrupt communications, and even be illegal.
ss network connection ss network connection
Communication Communication
Internet and online security - 79