Epson B-308 User Manual page 79

Maintenance menu
This menu allows you to make settings related to maintenance.
Head alignment
You can print a head alignment test pattern. From the printing results, you can adjust the head
alignment.
Cleaning
You can clean the print head. You can also print a nozzle check pattern before cleaning.
Cleaning sheet
You can clean up the rollers inside the printer.
Contrast adj.
You can adjust the contrast of the LCD screen. Press the u Up or d Down button to adjust contrast.
Network setting menu
This menu allows you to make network settings.
Item
Network setup
Network setup
You can select the method to configure the network settings.
When Auto is selected, the printer obtains the IP address, Subnet mask and Default gateway
automatically. When Panel is selected, you can specify the IP address, Subnet mask, and Default
gateway settings using the control panel. When Init N/W set is selected, you can revert the
network settings of the printer to the factory default value.
Auto
Panel IP address
Subnet mask
Default gateway
Init N/W set
Parameter
-
000.000.000.000–255.255.255.255
000.000.000.000–255.255.255.255
000.000.000.000–255.255.255.255
-
Using the Control Panel 79