Epson B-308 User Manual page 47

6. Select the appropriate document type as the Select Document Type setting.
7. Specify the Print Density and Increased Ink Drying Time as the Adjustments setting.
Note:
When you print dense photos on both sides of the paper, reduce the print density and increase the drying
time to improve quality.
8. Click OK to return to the Page Layout window.
9. Click Margins to open the Margins window.
10. Specify the edge of the paper where the binding will be placed. You can choose Left, Top, or
Right.
11. Choose cm or inch as the Unit setting. Then specify the width of the binding margin. You can
enter any width from 0.12 to 1.18 inches or 0.3 to 3.0 cm.
Note:
The actual binding margin may be different from the specified settings depending on your application.
Experiment with a few sheets to examine actual results before printing the entire job.
12. Click OK to return to the Page Layout window. Then click OK to save your settings.
13. Load paper into the printer, then send the print job from your application.
& See "Loading Paper" on page 20.
Note:
Do not try to pull out your prints before both sides of the page are printed.
Printing with Special Layout Options 47