8. Repower on the camera and refer to the following procedures to access
and configure it.
9. If this IP Bullet camera is connected to a PoE switch then the device can
be powered on without use the power adapter.
Note: The IR-113E/IR-123E (PoE model) supports IEEE 802.3af PoE
standard. It can be powered via the Ethernet cable when connected to a
PoE switch.
1.6 Locate the SD card slot
1. It is recommended that you use a tool with a hexagonal socket, such as
the socket spanner pictured below.
Note: The hexagonal socket is an optional extra.
2 Attach the socket spanner to the PVC tube cap, and twist
anti-clockwise to loosen the PVC tube.
Note: The bracket is an optional extra.
9