Start Setup; Install The Software - InFocus DisplayLink User Manual

2. Start Setup

A window will open showing choices. Select Start Setup, then click OK.
If you don't see the above window after you plug in the flash drive...
If you see any messages from Windows asking if software should run, you must allow
the software to run to be able to install.
If instead of the above window, a folder opens containing files, open the
InFocusAutoRun program in that folder (then go to step 3 below).
Click Start, then click My Computer (or open the My Computer shortcut). If you see an
item named InFocus Wireless DisplayLink, open it. Then in that folder, open the
InFocusAutoRun program (then go to step 3 below).
If you don't see the InFocus Wireless DisplayLink item in the My Computer folder,
you may have plugged in the flash drive in the wrong way around. Unplug the flash
drive, turn it over, and plug it in again.

3. Install the Software

In the Setup window, click Install InFocus Wireless DisplayLink Software:
8