Plug The Projector Adapter Into Your Projector - InFocus DisplayLink User Manual

10. Plug the Projector Adapter into your Projector

Note: If the Projector Adapter is already plugged into the projector, you can leave it
plugged in.
Make sure your projector is plugged into AC power, then turn it on.
Plug the Projector Adapter into your projector's DisplayLink connector (on some projectors this
connector is labeled Computer 1 DisplayLink).
The projector status indicator should light up (if it doesn't, make sure the projector is connected
to a live electrical outlet).
Note: The first time you connect your computer to the Projector Adapter, Windows may
automatically install more drivers, see step 9 above for example screens. After drivers are
installed, additional software installation may start, see step 11 below.
Wait for the Wireless DisplayLink taskbar icon to turn
Computer Adapters are wirelessly connected:
Note: If the icon doesn't turn green, see Troubleshooting for possible solutions.
green which shows that the projector and
13