Software Installation And First Time Use; Plug The Flash Drive Into Your Computer - InFocus DisplayLink User Manual

Software Installation and First Time Use

This section describes how to install the required software and how to start projecting wirelessly.
DON'T PLUG IN THE COMPUTER ADAPTER YET!
Follow the steps below – don't plug in the computer adapter until you are asked to do so.
Skip to Step 5 below if you're not installing from the flash drive.
If you're installing software you downloaded, then when you open the downloaded file, start
at step 5 below.

1. Plug the Flash Drive into your Computer

The Computer Adapter includes a retractable USB flash drive (labeled INSTALL) which
contains the required software. Extend this flash drive and plug it into a USB port on your
computer:
7