Install Displaylink Manager Software (If Needed); What's Next - InFocus DisplayLink User Manual

11. Install DisplayLink Manager Software (if Needed)

Congratulations!
Your projector and computer are now wirelessly connected.
What happens the first time there is a wireless connection?
It depends on whether or not InFocus DisplayLink Manager software was already installed on your
computer (if you previously used DisplayLink with a USB cable, then DisplayLink Manager software is
already installed).
If DisplayLink Manager software was already installed on your computer:
Your computer is ready to project wirelessly. Whenever the Computer Adapter and Projector
Adapter are wirelessly connected, DisplayLink Manager software will work the same as it did before
– except now you don't need a USB cable.
If DisplayLink Manager software was not already installed on your computer:
DisplayLink Manager software installation will start automatically. When installation is
finished, your computer will be ready to project wirelessly. Follow the on-screen instructions to
install. After DisplayLink Manager has been installed, then whenever your projector is wirelessly
connected to your computer, your computer's screen will be projected, and the DisplayLink Manager
taskbar icon will be visible near the clock:
Right-click this icon for DisplayLink controls and options (for detailed instructions, see the
DisplayLink User's Guide – download it at www.infocus.com/support/displaylink).
If DisplayLink Manager software installation doesn't automatically start (and it's not already
Note:
installed on your computer), see the DisplayLink User's Guide for instructions, or download it and
DisplayLink software at:

What's Next?

See Regular Use below for details on how to disconnect (and re-connect) the adapters, and how
to share a projector between multiple computers. See InFocus Wireless DisplayLink Control
Panel below for detailed information about using the Wireless DisplayLink control panel
software.
www.infocus.com/support/displaylink
14