Volvo 262 Owner's Manual page 68

1976 Volvo 262 264 265
pg. 63 Replacing bulbs
License plate light
Insert a screwdriver through the opening in the housing and depress the catch tab.
Pull out the housing assembly.
Pull out the cover end which is not provided with a lock pin.
Replace the bulb.
When re-installing, first locate the lock pins (see picture) and then press on the cover.
Check that the rubber gasket is positioned and press the housing assembly into place.
file:///K|/ownersdocs/1976/1976_262_264_265/76262264265_03b.htm (9 of 14)12/22/2006 9:24:48 PM