Hitachi DH 40MR Instruction And Safety Manual page 22

English
10. Surface Roughing (Hammering)
(1) Bushing Tool
Code No. 313477
11. Tamping (Hammering)
(1) Rammer
Code No. 313478
12. Syringe (for chip removal)
Code No. 944575
13. Hammer grease A
1.1 lbs (500 g) (in a can) Code No. 980927
0.15 lbs (70 g) (in a green tube) Code No. 308471
NOTE:
Specifications are subject to change without any obligation on the part of the HITACHI.
22
(2) Shank
Overall length
8-21/32" (220 mm) 313479
(2) Shank
Overall length
8-21/32" (220 mm) 313479
Code No.
Code No.