GE 165D4700P138 Owner's Manual page 23

Problem
Yellow or brown film
White film on inside
surfaces
Cycle and option indicator
lights stay on when cycle
is completed
Possible Causes
Tea or coffee stains
An overall yellow or
brown film can be caused
by iron deposits in water
Hard water minerals
This is normal
What To Do
Remove the stain by hand,
•
using a solution of 1/2 cup
bleach and 3 cups warm
water.
WARNING
Before cleaning interior,
wait at least 20 minutes
after a cycle for the
heating element to cool
down. Failure to do so can
result in burns.
A special filter in the water
•
supply line is the only way
to correct this problem.
Contact a water softener
company.
To clean the interior, apply
•
dishwasher detergent to a
damp sponge. Wear
rubber gloves. Do not use
any type of cleanser other
than dishwasher detergent
because it may cause
foaming or sudsing.
Unlatch the door to turn
•
off the Cycle and Energy
Option indicator lights.
NOTE: The Cycle On light
will stay on until all cycles
are complete. Wait until
this light goes off to
unlatch the door or a cycle
will be interrupted.
23