Voltage Regulation - Tripp Lite SMART3000CRMXL Specifications

UPS input connection L5-30P; Hardwire
type
UPS Input cord length 10 ft.
(ft.)
UPS Input cord length 3.05
(m)
Recommended 120V 30A
Electrical Service
Voltage compatibility 120
(VAC)
BATTERY
Full load runtime 7.5 min. (2880w)
(minutes)
Half load runtime 19 min. (1440w)
(minutes)
External battery pack BP48V24-2U
compatibility
DC system voltage 48
(VDC)
Battery recharge rate Less than 7.2 hours from 10% to 90%
(included batteries)
Replacement battery RBC94-2U
cartridge (internal
UPS battery
replacement)
Battery Access Battery access door allows hot swap battery replacement without powering connected equipment off

VOLTAGE REGULATION

Voltage regulation Automatic Voltage Regulation (AVR) circuits maintain clean, regulated computer-grade 120V nominal output,
description without using battery power, during brownouts to 83V and overvoltages to 145V
Overvoltage correction Input voltages between 127 and 145V AC are reduced by 12%
Undervoltage Input voltages between 96 and 108 are boosted by 12%
correction
Severe undervoltage Input voltages between 83 and 95 are boosted by 24%
correction
LEDS ALARMS & SWITCHES
LED Indicators 5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status
Alarms 3 function audible alarm indicates power failure conditions (4 short beeps every 10 seconds), overload (continuous
short beeps) and low battery (continuous tone)
Switches Yes, includes 2 front panel mounted push-button switches for system enable, self-test and alarm cancel functions.
Back panel includes battery charge level switch for internal or external battery configurations
SURGE / NOISE SUPPRESSION
UPS AC suppression 570 joules
joule rating
EMI / RFI AC noise Yes
suppression
AC suppression Instantaneous
response time
(limit 1); BP48V48RT4U (multi-pack compatible)
(quantity 2)