Schedule Blocking - NETGEAR R6200v2 User Manual

2. In the Service Name field, type a descriptive service name.
3. In the Service User list, select Any, or select Single address and enter the IP address of
one computer.
• Any (the default), allows any computer on the Internet to use this service.
• Single address restricts the service to a particular computer.
4. Select the service type, either TCP or UDP or TCP/UDP (both). If you are not sure, select
TCP/UDP.
5. In the Triggering Port field, enter the number of the outbound traffic port that will trigger the
inbound ports to open.
6. Enter the inbound connection port information in the Connection Type, Starting Port, and
Ending Port fields.
7. Click the Apply button.
The service appears in the Port Triggering Portmap table.
8. Make sure that you enable port triggering so that the service that you added will be used.

Schedule Blocking

You can specify the days and time that you want to block Internet access.

To schedule blocking:
1. Select ADVANCED > Security > Schedule.
2. Set up the schedule for blocking keywords and services.
• Days to Block. Select days on which you want to apply blocking by selecting the
appropriate check boxes, or select the Every Day check box to select the check
boxes for all days.
• Time of Day to Block. Select a start and end time in 24-hour format, or select the All
Day check box for 24-hour blocking.
R6200v2 Smart WiFi Router
Security
77