Table of Contents
Advertisement
can usually determine this information by contacting the publisher of the application or user
groups or news groups.
To enable port triggering:
1.
Select ADVANCED > Advanced Setup > Port Forwarding/Port Triggering.
2.
Select the Port Triggering radio button.
3.
Clear the Disable Port Triggering check box.
Note:
If the Disable Port Triggering check box is selected after you
configure port triggering, port triggering is disabled. However, any
port triggering configuration information you added to the router is
retained even though it is not used.
4.
In the Port Triggering Time-out field, enter a value up to 9999 minutes.
This value controls the inactivity timer for the designated inbound ports. The inbound
ports close when the inactivity time expires. The time-out value is required so that the
router can determine when the application has terminated.
To add a port triggering service:
1.
On the Port Forwarding/Port Triggering screen, click the Add Service button.
R6200v2 Smart WiFi Router
Security
76
Hide quick links:
Advertisement
Table of Contents
