Telefunken Digiframe 7112 User Manual page 52

[Type some text]
Fig.32
Fig.33
a. Setting the date and time
Warning! This function can only be configured using the remote control.
When the calendar screen is displayed, press the "Setup" key: the menu is
displayed.
Select the "set time" line (Fig. 32) using the "Up/Down" keys, then confirm your
choice by pressing the "Enter" key:
Select the date and time using the "Up/Down-Right-Left" keys, then press
"Enter": the date and time are now set.
b. Setting the alarm
When the calendar screen is displayed, press the "Setup" key: the menu is
displayed.
Select the "set alarm" line (Fig. 33) using the "Up/Down" keys, then confirm your
choice by pressing the "Enter" key:
Using the "Up/Down-Left/Right" keys on the remote control, now set the date and
time of the alarm, as well as the type of alarm (standard alarm or music) and the
frequency of the alarm (once, every day, or disabled).
Once the setting has been made press the "Exit" key twice to exit the menu.
Digiframe
Digital photo frame
Non binding document, subject to modification in the event of
misprint(s) – MKG0308
51