Telefunken Digicadre 14001 User Manual page 19

There are 9 different possible transitions (fade in/out, vertical stripes, cross, mosaic,
blocks, dimming, lines, enlargement, silk-screen) to which "no transition" and "random"
are added. "Random" mode is programmed by default.
When the frame is in slide-show mode and photos are being displayed, press the remote
control's EXIT button once to leave the slide-show, and then press SETUP. The menu is
displayed.
Using the remote control's UP/DOWN buttons, highlight the "transition effects" line, and
the press ENTER. The different transitions appear on screen (fig. 9).
Select the desired transition using the UP/DOWN buttons, and then press ENTER to
confirm. Press EXIT to leave the menu, and then ENTER to launch the slide-show again.
Fig.9
When the frame is in slide-show mode and photos are being displayed, press the
button once to leave the slide-show, then press
"transition effects" line, and then press
Select the desired transition using the
choice.
With the remote control
With the frame
. Using the
. The different transitions are displayed (fig. 9).
buttons, and then press
Document non contractuel, soumis à modification en cas
d'erreur typographique – MKG0207
Non binding document, subject to modification in the event
of misprint(s) – MKG0207
20
buttons, highlight the
to confirm your