Table of Contents
Advertisement
[Type some text]
Do not place it near heat sources such as radiators or other heaters ... Do not
position the frame facing sunlight to avoid reflection.
Avoid exposing the digital photo frame to the rain, water or damp. Do not place it
in a sink or a basin where it could come into contact with water.
Never place heavy or sharp objects on the frame, the screen or the power supply
cable.
Make sure you don't plug the digital photo frame into a socket or cable with too
powerful an electricity supply. This may cause overheating, fire or an electric
shock.
Be careful how you route the power supply cable; it should not be trodden on or
be in contact with other objects. Do not run the cable under a carpet.
Check the condition of the cable regularly to avoid damage. If the cable is
damaged, unplug it and replace it.
Ventilation
The memory card slots and other openings allow the frame to be ventilated.
In order to ensure your frame works at its best and to prevent overheating, these
openings should not be obstructed or covered.
Keep the frame a sufficient distance from the wall to aid ventilation.
Do not stand the digital photo frame on a bed or sofa to avoid overheating.
Warning!
Never remove the plastic cover located at the back of the frame. The digital photo
frame includes electrical circuits and you risk injury if you touch them.
Never try and repair your digital frame yourself.
Digiframe
Digital photo frame
Non binding document, subject to modification in the event of
misprint(s) – MKG0308
56
Advertisement
Table of Contents
