Preface; Warning - Theta Digital Enterprise Owner's Manual

PREFACE

CONGRATULATIONS
You have just acquired one of the most advanced and versatile components for the amplification of audio ever
to have been developed.
IMPORTANT
Save all packaging in a dry place away from fire hazards. Your Enterprise is a precision electronic instrument
and should be properly packaged any time shipment is made. In the unlikely event that you have to return
your Enterprise to the factory or dealer for service or updating, the original packaging will best protect the unit
from shipping damage.
In order to achieve the fullest flexibility and enjoyment from your Enterprise, we at Theta recommend that you
read this manual in full before connecting the unit to your audio system.
Note: It is imperative that the Enterprise be operated in a well-ventilated environment and that the immediate
external temperature be maintained as specified. External cooling fans may be required in some cases. Do
not stack any equipment directly above, below or to the immediate sides of the Enterprise to protect it from
overheating, as well as to protect the continued functionality of equipment near and around it.
Warning: The Enterprise is a balanced bridge amplifier, thus the negative speaker terminal is NOT a ground,
and cannot be connected to a system ground or a loudspeaker system with a common ground. Consult your
speaker manufacturer to ensure that any speaker in your system that will be connected to the Enterprise does
NOT have internal circuitry with a common ground.
WARNING: When connecting the speaker wire to the Reich output connector, using the hex tool provided –
DO NOT OVER TIGHTEN. There is a lot of surface area in the Reich connector to create a complete
connection with a minimum of torque applied. OVER TIGHTENING WILL ULTIMATELY BREAK THE REICH
CONNECTOR, WHICH WILL NOT BE COVERED UNDER WARRANTY. In addition, if the hex stud is
removed from the Reich connector, make certain that it is not cross threaded before fully reinserting it as this
will destroy the threads. CROSS THREADING THE HEX STUD WILL NOT BE COVERED UNDER
WARRANTY.

WARNING

United States law prohibits disposition of these commodities to Libya, Laos, North Korea, Cambodia or Cuba
unless otherwise authorized by the United States.
2003 Theta Digital Corporation. All rights reserved.
Written and Illustrated by Glenn Buckley.
This manual is also available for download as a PDF file at Theta Digital's website.
http://www.thetadigital.com. Check out the library.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, for any purpose, without the express written permission of Theta Digital Corporation.
ii