Battery Solutions; Aller Id S Olutions; Andset Anagement Oftware Olutions; Handset Management Software Solutions - GE 28128 Series User Manual

Caller ID Solutions
No Display
• Charge the battery (for 16 hours). Or replace the battery.
• Make sure that the unit is connected to a non-switched electrical outlet.
Disconnect the power adaptor and remove the back up batteries from the
base. Wait for  seconds and insert the backup batteries into the base, then
plug the power adaptor back into the base.
Caller ID Error Message
• The unit displays this message if it detects anything other than valid Caller ID
information during the silent period after the first ring. This message indicates
the presence of noise on the line.
No Caller ID
• In order to receive Caller ID information, you must subscribe to the standard
name/number Caller ID service from your local telephone company.

Battery Solutions

If you experience any of the following problems, even after fully recharging the
battery, you may need to replace the battery pack:
• Short talk time
• Poor sound quality
• CHARGE/IN USE indicator on the base fails to illuminate.
• Limited range

Handset Management Software Solutions

Software does not work correctly
• Check for software updates at http://www.ge.com/phones/.
6