HP ProLiant ML310e Specification page 5

QuickSpecs
Standard Features
Maximum Internal
Storage
One of the following
depending on model
Interfaces
Industry Standard
Compliance
Server Power Cords
Hot Plug LFF SAS
Hot Plug SFF SAS
Non Hot Plug LFF SAS
Hot Plug LFF SATA
Hot Plug SFF SATA
Non Hot Plug LFF SATA
Hot Plug SFF SAS SSD
Hot Plug SFF SATA SSD
Hot Plug LFF SATA SSD
Serial
Video
Network RJ-45 (Ethernet) 2 (1 shared for HP Integrated Lights-Out)
HP iLO Remote
Management Network Port
Micro SD slot
USB
ACPI 2.0b Compliant
PCIe 3.0 Compliant
PXE Support
WOL Support
Microsoft® Logo certifications
USB 2.0 /3.0 Support
The ProLiant ML310e Gen8 v2 server is a tower server that ships standard with a 6' country specific NEMA
power cord that allows connection to wall outlets in a home or office. If customers require additional local
power cords, they can check the power cord matrix for the appropriate country specific sku. Please see the
following power cord matrix: http://www.hp.com/go/powercordmatrix. To install the ML310e Gen8 v2
server in a rack, the Tower to Rack Conversion kit (417705-B21 ) is required as well as a PDU power cord
(416151-B21) to connect to a PDU in a data center rack.
DA - 14564 Worldwide — Version 11 — December 13, 2013
HP ProLiant ML310e Generation 8 (Gen8) v2
16TB
9.6TB
2.4TB
16TB
8TB
12TB
3.2TB
6.4TB
3.2TB
1 (rear)
1 (rear)
1 Gb Dedicated
1 (internal)
NOTE: The Micro SD slot is not a hot-pluggable device. Customers should not
attempt to plug a Micro SD card into the Micro SD slot while the server is
powered.
8 (4 front, 2 rear(USB3.0), 1 internal standard USB and 1 internal USB header)
NOTE: RHEL 5.9 OS would not be supporting USB3.0
4 x 4TB
8x 1.2TB
4 x 600GB
4 x 4TB
8 x 1TB
4 x 3TB
8 x 400GB
8 x 800GB
4 x 800GB
Page 5