HP ProLiant DL560 Specification page 8

QuickSpecs
Standard Features
Graphics
Form Factor
On System Management
Integrated Matrox G200 video standard
1280 x 1024 (32 bpp)
1920 x 1200 (16 bpp)
HP iLO 4 On System Management Memory
16 MB Flash
256 MB DDR 3 with ECC (112 MB after ECC and video)
2U Rack form factor, ships with ball bearing rails and cable management system
NOTE: Gen8 rail kits have changed significantly from prior generation rail kits. Please take a moment to
review the installation documentation that comes with the server to help you with the installation of your
Gen8 server.
CAUTION: HP recommends that at least two people are used for all rack server installations. Please refer
to your installation instructions for proper tools and number of people to use for any installation.
3.44 (8.74 cm) Height x 17.54" (44.55 cm) Width x 29.5" (74.94 cm) Length
HP iLO Management
Engine
DA - 14395 Worldwide — Version 17 — December 13, 2013
HP ProLiant DL560 Generation8 (Gen8)
HP iLO Management Engine is a comprehensive set of embedded management
features supporting the complete lifecycle of the server, from initial
deployment, through ongoing management, to service alerting and remote
support. HP iLO Management Engine comes standard on all HP ProLiant Gen8
servers. The HP iLO Management Engine portfolio includes:
HP iLO: The HP iLO (Integrated Lights-Out) management processor is
the core foundation for the HP iLO Management Engine
HP Agentless Management: Provides built in server health monitoring
and alerting capability without OS agents, that starts working the
moment a power cord and an Ethernet cable are connected.
HP Active Health System: Always on, continuous monitoring for
increased stability and shorter downtimes; 100% configuration history;
Health and service alerts and easy export and upload to Service and
Support.
HP Intelligent Provisioning: Lets customers provision and configure a
single server without any separate media. No more SmartStart CDs or
Smart Update Firmware DVD are needed.
To start Intelligent Provisioning:
Press the F10 key during the ProLiant Gen8 server boot
process (also known as power on self test or POST).
Please go to the Intelligent Provisioning website at
www.hp.com/go/intelligentprovisioning
information and to view usage videos.
Use the Service Pack for ProLiant (SPP) at
www.hp.com/go/spp
updates.
HP iLO Mobile App: Enables the ability to access, deploy, and manage
your server anytime from anywhere from select smartphones and
mobile devices. For additional information please visit:
www.hp.com/go/ilo/mobileapp
for additional
to get firmware and software
Page 8