HP 1910 Series Quickspecs page 18

QuickSpecs
Technical Specifications
HP 1910-16G Switch (JE005A)
Ports
Physical characteristics
Memory and processor
Mounting
Performance
Environment
Electrical characteristics Frequency
Safety
Emissions
Management
Notes
Services
16 RJ-45 auto-negotiating 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX,
IEEE 802.3ab Type 1000BASE-T)
4 SFP 1000 Mbps ports
1 RJ-45 console port to access limited CLI port
Supports a maximum of 16 autosensing 10/100/1000 ports plus 4 1000BASE-X SFP ports, or a
combination
Dimensions
Weight
Module
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included)
100 Mb Latency
1000 Mb Latency
Throughput
Routing/Switching
capacity
Routing table size
MAC address table size
Operating temperature
Operating relative
humidity
Non-operating/Storage
temperature
Non-operating/Storage
relative humidity
Voltage
Maximum power rating
Notes
UL 60950; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1-03
FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55024; EN 61000-3-2 2000,
61000-3-3; ICES-003 Class A
IMC - Intelligent Management Center; limited command-line interface; Web browser; SNMP Manager; IEEE
802.3 Ethernet MIB
SFP ports and copper ports can work simultaneously, independent of each other to give a total of 20
Gigabit-capable ports.
3-year, 4-hour onsite, 13x5 coverage for hardware (UV786E)
3-year, 4-hour onsite, 24x7 coverage for hardware (UW485E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (UW036E)
DA - 13677 Worldwide — Version 12 — December 9, 2013
17.4(w) x 6.3(d) x 1.7(h) in (44.2 x 16 x 4.32 cm) (1U height)
6.8 lb (3.08 kg)
ARM @ 333 MHz, 128 MB flash, 128 MB RAM; packet buffer size: 512 KB
< 5 µs
< 5 µs
up to 29.8 million pps
40 Gbps
32 entries
8192 entries
32°F to 113°F (0°C to 45°C)
10% to 90%, non-condensing
-40°F to 158°F (-40°C to 70°C)
10% to 95%, non-condensing
50 / 60 Hz
100-240 VAC
25.1 W
Maximum power rating and maximum heat dissipation are the worst-case
theoretical maximum numbers provided for planning the infrastructure with
fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all
modules populated.
HP 1910 Switch Series
Page 18