HP MSL2024 Quickspecs page 25

QuickSpecs
Technical Specifications
Weight
Reliability
Average Cartridge Swap Time
(drive to slot, slot to drive)
Initialization Time
Inventory Time
Average Cartridge Swap Time
in Extended Libraries (drive to
slot, slot to drive)
Connectors
LED Indicators
(on front panel)
Management Interface
Power
Input Requirements
Relative Humidity
(non-condensing)
Temperature Range
(wet bulb)
Out of box
Shipping
Note: The weight of each library varies somewhat based on the type and number of LTO tape drives
contained in the configuration. The weights shown here are for MSL2024/4048 configurations with
1/2 drives respectively per model. Configurations with different numbers of tape drives can be
calculated by adding or subtracting the weight of a tape drive. An LTO-6 Ultrium 6250 drive weighs
2.10 kg/4.63 lbs.
MSBF (mean swaps
between failures)
MTBF (mean time between
failures)
Extended Library
Configuration
2024/4048
4048/4048
2024/8096
4048/8096
NOTE: Two MSL2024s or two MSL8096s are not supported configurations
MSL8048 must have all 96 slots enabled prior to using the Library Extender. Once all 96 slots have
been enabled for use, the supported configurations are the same as 8096s.
Mini-SAS (MSL SAS model only)-
68-pin HDTS ( MSL SCSI models only)
LC Optical Fibre (MSL FC models only)
(1)RJ-45 Ethernet
(1) USB port
Operating
Shipping
Operating
Shipping
NOTE: Library operating temperature limits are based on the industry standard tape limit.
DA - 13258 Worldwide — Version 39 — December 2, 2013
HP StoreEver MSL2024 and MSL4048 Tape Libraries
32.9 lb (14.9 kg)
56.9 lb (25.8 kg)
2 Million robot load/unload cycles
100,000 hours (based on 1M MSBF)
45 seconds
80 to 120 seconds
1:20 minutes
(using bar code labeled cartridges)
Average Swap Time
100 seconds
98 seconds
110 seconds
110 seconds
Ready LED (Green): shows ready status information
Clean LED (Amber): shows fault status information
Attention LED (Amber): shows fault status information
Error LED (Amber): shows fault status information
10/100 Mbytes/second, auto-configuring interface. RJ-45 connection.
Https configurable.
MSL2024: 168 Watts (max)
MSL4048: : 312 Watts (max)
100 to 240 VAC, 50 to 60 Hz, 2.5 Amperes
50° to 95° F (10° to 35° C)
-22° to 140° F (-30° to 60° C)
47.2 lbs (21.4 kg)
74.7 lbs (33.9 kg)
45 seconds
2:15 minutes
(using bar code labeled cartridges)
20% to 80%
20% to 90%
Page 25