Fujitsu ETERNUS DX80 S2 Overview page 18

Chapter 2 Specifications
2.1 ETERNUS DX Disk Storage System Specifications
Drive capacity
(Speed)
Drive interfaces
Interfaces for remote monitoring and operation management
Power control interface
*1: Physical capacity is calculated based on the assumption that 1TB=1,000GB and 1GB=1,000MB.
*2: Logical capacity is calculated based on the assumption that 1TB=1,024GB, 1GB=1,024MB and that drives are
formatted in a RAID5 configuration. The available capacity depends on the RAID configuration.
*3: 3.5" type and 2.5" type drive enclosures can be installed together.
*4: Two ports for each controller
*5: One port for each controller. Power synchronization is performed via a power synchronized unit.
Item
2.5" SAS disks Non-self-
encrypting
Self-
encrypting
2.5" Nearline SAS disks
2.5" SSDs
3.5" SAS disks
3.5" Nearline SAS disks
3.5" SSDs
18
ETERNUS DX80 S2/DX90 S2 Disk storage system Overview
Copyright 2013 FUJITSU LIMITED
ETERNUS DX80 S2
300GB, 450GB, 600GB, 900GB (10,000rpm)
300GB (15,000rpm)
300GB, 450GB, 600GB, 900GB (10,000rpm)
1TB (7,200rpm)
100GB, 200GB, 400GB, 800GB
300GB, 450GB, 600GB (15,000rpm)
1TB, 2TB, 3TB, 4TB (7,200rpm)
100GB, 200GB, 400GB, 800GB
Serial Attached SCSI (6Gbit/s)
Ethernet (1000Base-T/100Base-TX/10Base-T)
*5
RS232C
*4
P3AM-4812-11ENZ0