Campbell CR10 PROM Replacement Procedure

Prom replacement procedure

Hide thumbs Also See for CR10 PROM:

Download this manual See also: Operator's Manual

App. Note Code: 1D-T

CR10 PROM Replacement Procedure

815 W. 1800 N.

Logan, Utah 84321-1784

(435) 753-2342

FAX (435) 750-9540

www.campbellsci.com

Page 1 App. Note Code: 1D-T CR10 PROM Replacement Procedure 815 W. 1800 N. Logan, Utah 84321-1784 (435) 753-2342 FAX (435) 750-9540 www.campbellsci.com Copyright (C) 2002 Campbell Scientific, Inc.
Page 3: Tools Required
This document will walk you through the procedure for replacing the firmware (PROM) in a Campbell Scientific CR10 Measurement and Control System. If you prefer to have Campbell Scientific install the PROMs (for a nominal fee), request a Returned Materials Authorization (RMA) from Campbell Scientific.
Page 4 (# and $ on Figure 1). FIGURE 1. Removing Wiring Panel End Bracket 5. Separate the baseplate from the wiring panel (Figure 2). FIGURE 2. Removing Baseplate Copyright © 2002 Campbell Scientific, Inc. App. Note: 1D-T 815 W. 1800 N., Logan, UT 84321 (435) 753-2342...
Page 6 PROM oriented the same direction as the sur- rounding PROMs. FIGURE 8. Inserting the New PROM Copyright © 2002 Campbell Scientific, Inc. App. Note: 1D-T 815 W. 1800 N., Logan, UT 84321 (435) 753-2342...