Input Menu; Computer 1: Rgb/Component /Rgb (Scart) /S-Video; Video - Panasonic PT-LX22EA Operating Instructions Manual

Input menu

Select [Input] from the Main Menu (see
"Navigating through the menu" on page 33),
then select the item from the sub-menu.
Remote Control
Computer 1: RGB/Component
/RGB (Scart) /S-video
1 ) Press ▲▼ to select [Computer 1].
2 ) Press ► to access the submenu.
3 ) Press ▲▼ to select [RGB],
[Component] , [RGB(Scart)] or
[S-video].
4 ) Press the <SELECT> button.
When Computer is selected, Component,
z
[RGB(Scart)] or [S-video] can be available.
Computer System Selection
J
This projector automatically tunes to various types
of computers with its Multi-scan system and Auto
PC Adjustment. If a computer is selected as a signal
source, this projector automatically detects the signal
format and tunes to project a proper image without
any additional settings. (Signal formats provided in
this projector are shown on pages 66-68.)
When the projector can not recognize the
AUTO
connected signal conforming to the
provided PC Systems, Auto is displayed
on the System Menu box and the [Auto PC
adjustment] function works to display proper
images. If the image is not projected
properly, a manual adjustment is required.
There is no signal input from the computer.
- - - -
Check the connection between your
computer and the projector.
The preset system is manually adjusted in
Mode 1
the PC adjust Menu. The adjusted data can
be stored in Mode 1-10.
36
- ENGLISH
Control Panel
PC Systems provided in this projector
SVGA 1
is chosen. The projector chooses a proper
system provided in the projector and
displays it.
* Mode 1 and SVGA 1 are examples.
1 ) Press ▲▼ to select [System].
2 ) Press ► or the <SELECT> button to
access the submenu.
3 ) Press ▲▼ to select the desired system.

Video

Press ▲▼ to select [Video] and then
press the <SELECT> button.
Video System Selection
J
Video or S-video
Auto
The projector automatically detects an incoming video
system, and adjusts itself to optimize its performance.
When [Video System] is [PAL-M] or [PAL-N], select
the system manually.
PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N
If the projector cannot reproduce proper video image,
select a specific broadcast signal format from among
[PAL], [SECAM], [NTSC], [NTSC 4.43], [PAL-M] and
[PAL-N].
Component
Auto
The projector automatically detects an incoming video
signal, and adjusts itself to optimize its performance.
COMPONENT VIDEO SIGNAL FORMAT
If the projector cannot reproduce proper video image,
select a specific component video signal format
among [480i], [576i], [480p], [576p], [720p], [1035i]
and [1080i].