Advertisement
S
F
P
E
C
I
L
DLP
™
Projector
Dimensions (W × H × D)
Weight
3
Operation noise*
Operating temperature
Operating humidity
Remote control unit
Power supply
6
Operation range*
Dimensions (W × H × D)
Weight
Supplied accessories
Optional accessories
Ceiling mount bracket
Attachment for ceiling mount bracket
Replacement lamp unit
Serial conversion cable
Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice.
* 1 When [VGA Out (Standby)] / [In Standby Mode (Audio)] are all set to [Off].
* 2 When [VGA Out (Standby)] / [In Standby Mode (Audio)] are all set to [On].
* 3 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
* 4 Only compatible with dot clock frequency of 27 MHz (pixel repetition signal)
* 5 With legs at shortest position.
* 6 Operation range differs depending on environments.
As of June 2013
SFD13M009
E
286 mm × 100.6 mm*
(11-1/4 x 3-31/32*
Approx. 2.3 kg (5.1 lbs)
34 dB (
5°C – 40°C (41°F – 104°F) [Less than 750 m (2,500 ft) above sea level];
5°C – 35°C (41°F – 95°F) [750 – 1,500 m (2,500 – 5,000 ft) above sea level]
5°C – 30°C (41°F – 86°F) [1,500 – 3,000 m (5,000 – 10,000 ft) above sea level]
20%– 80% (no condensation)
3 V DC (Lithium coin cell battery x 1)
Approx. 8 m (26 ft 3 in) when operated from directly in front of the sig-
nal receptor
40.6 x 86.5 x 7.2 mm (1-19/32 × 3-13/32 × 9/32 inches)
Approx. 23 g (0.8 oz) (including battery)
Power cord (× 1) (× 2 for PT-LX270EA)
Wireless remote control unit (× 1)
Battery for remote control (CR2025 type × 1)
Computer cable (for VGA) (× 1)
ET-PKV100H (for high ceilings)
ET-PKV100S (for low ceilings)
ET-PKL300B
ET-LAL320
ET-ADRS
5
× 192 mm
5
x 7-9/16 inches)
:
), 29 dB (
LAMP POWER
NORMAL
PT-LX270
:
)
LAMP POWER
ECO
3 / 1 0
Advertisement
