Important Safety Instructions; Grounding Instructions - Bissell Auto Care ProHeat 14254 Series User Manual

Table of Contents

Advertisement

I
MPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic
precautions should be observed, including
the following:
Read all instRuctions befoRe
using youR auto caRe®
WARNING:
To reduce the risk of
fire, electric shock, or
injury:
Use only BISSELL cleaning products intended for use in
this machine to prevent internal component damage. See
the Cleaning fluid section of this guide.
Do not use for any purpose other than described in this
User's Guide.
Use only manufacturer's recommended attachments.
Do not expose to rain, store indoors.
Do not handle Auto Care® ProHeat plug or
appliance with wet hands.
Do not leave Auto Care® ProHeat when it is plugged in.
Do not put any object into appliance openings or use with
blocked openings. Keep free of dust, lint, hair, and anything
that may reduce air flow.
Do not expose hair, loose clothing, fingers or body parts to
openings or moving parts.
Keep appliance on a level surface.
Be extra careful when cleaning stairs.
Do not carry the appliance while in use.
Never spray at people or animals.
Do not allow to be used as a toy. Close attention is neces-
sary when used by or near children.
Do not pick up hot or burning objects.
Do not pick up flammable or combustible materials (lighter
fluid, gasoline, kerosene, etc.) or use in the presence of
explosive liquids or vapor.
Do not pick up toxic material (chlorine bleach,
ammonia, drain cleaner, gasoline, etc.).
Do not use appliance in an enclosed space filled with vapors
given off by oil base paint, paint thinner, some moth
proofing substances, flammable dust, or other explosive
or toxic vapors.
Do not pull or carry by cord, use cord as a handle, close
door on cord, pull cord around sharp corners or edges, run
appliance over cord, or expose cord to heated surfaces.
Do not use with damaged cord or plug.
Turn off all controls before unplugging.
Unplug before attaching the TurboBrush.
Unplug from outlet when not in use and before
conducting maintenance and troubleshooting.
Do not use Auto Care® ProHeat if it has been dropped,
damaged, left outdoors or dropped into water. Have it
repaired at an Authorized Service Center.
w w w . b i s s e l l . c o m
Unplug by grasping the plug, not the cord. Do not unplug by
pulling on cord.
Always connect to a properly grounded outlet; see grounding
instructions.
Do not modify the 3-prong grounded plug.
SAVE THESE
INSTRUCTIONS
GROUNDING
INSTRUCTIONS
this appliance must be connected to
a grounded wiring system. if it should
malfunction or break down, grounding
provides a safe path of least resistance
for electrical current, reducing the risk
of electrical shock. the cord for this
appliance has an equipment-grounding
conductor and a grounding plug. it
must only be plugged into an outlet that
is properly installed and grounded in
accordance with all local codes and
ordinances.
grounded
outlets
grounding
Pin
WARNING:
improper connection of the equipment-
grounding conductor can result in a risk
of electrical shock. check with a quali-
fied electrician or service person if you
aren't sure if the outlet is properly
grounded. do not Modify tHe
Plug. if it will not fit the outlet, have a
proper outlet installed by a qualified
electrician. this appliance is designed
for use on a nominal 120-volt circuit,
and has a grounding attachment plug
that looks like the plug in the drawing
above. Make certain that the appliance
is connected to an outlet having the
same configuration as the plug. no
plug adapter should be used with
this appliance.
this model is for household use only.
8 0 0 . 2 3 7 . 7 6 9 1
3

Advertisement

Table of Contents
loading

Table of Contents