Panasonic GP-X SERIES Specifications page 8

SPECIFICATIONS
Sensor heads
Type
For 0.8 mm
Item Model No.
Sensing range (Note 2) 0 to 0.8 mm
Standard sensing object
Temperature characteristics (Note 3)
Pollution degree
Protection
Ambient temperature
Ambient humidity
Voltage withstandability
Insulation resistance
Vibration resistance
Shock resistance
Enclosure
Cable protector
Sensing part
Cable
Cable extension
Net Weight (Note 5)
Accessories
Notes: 1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 °C
2) The sensing range is specified for the standard sensing object.
3) This value represents 20 to 60 % of the maximum sensing distance when combining the sensor head and the controller.
4) For the flexible cable type, please contact our office.
5) The given weight of the threaded type sensor head is the value including the weight of the nuts and the toothed lock washer.
BCD output unit
Model No.
Item
Current consumption
N-channel MOSFET open drain
Outputs
• Maximum sink current: 50 mA
5 digits BCD,
Polarity
• Applied voltage: 30 V DC or less (between output and GND)
indication, VALID
• Residual voltage: 1 V or less (at 50 mA sink current)
Non-voltage contact or NPN open-collector transistor input
Hold input
• Low: 0 to 1 V • High: Open
Material
Weight Net weight: 30 g approx.
Accessory Mounting bracket [Stainless steel (SUS304)]: 1 pc.
Note: Connects to the control device with GP-XBCC3 cable with connector
on one end for BCD output unit (3 m
High Speed High Accuracy Eddy Current Type Digital Displacement Sensor
Non-threaded type
0.031 in sensing For 1 mm 0.039 in sensing For 2 mm
GP-X3SE GP-X5SE
0 to 0.031 in 0 to 1 mm 0 to 0.039 in
Stainless steel (SUS304) / Iron sheet [Cold rolled carbon steel (SPCC)] 60 × 60 × t 1 mm
IP67 (IEC), IP67g (JEM) (Refer to p.1010 for defails of standards.)
–10 to +55 °C
250 V AC for one min. between all supply terminals connected together and enclosure
20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 150 Hz frequency, 0.75 mm
500 m/s acceleration (50 G approx.) in X, Y and Z directions for five times each
2
Stainless steel (SUS303)
–
ABS PAR
High frequency coaxial cable with connector, 3 m
Extension up to total 10 m
40 g approx. 40 g approx.
–
GP-XBCD
20 mA or less
Enclosure: ABS
9.843 ft cable length, optional).
0.079 in sensing For 2 mm 0.079 in sensing For 5 mm
GP-X8S GP-X10M
0 to 2 mm 0 to 0.079 in 0 to 2 mm 0 to 0.079 in
0.07 % F.S./°C or less
3 (Industrial environment)
+14 to +131 °F, Storage: –20 to +70 °C
35 to 85 % RH, Storage: 35 to 85 % RH
0.030 in amplitude in X, Y and Z directions for two hours each
PP
ABS
9.843 ft
32.808 ft is possible with the optional cable.
40 g approx. 50 g approx.
Nut: 2 pcs., Toothed lock washer: 1 pc.
Controller communication unit
Model No.
Item
Current consumption
Material
Weight
Accessory
Mounting bracket [Stainless steel (SUS304)]: 1 pc.
Note: Each GP-XCOM is connected using a link cable for controller
communication units (SL-F□, optional).
When GP-XCOM is used, controllers cannot communicate if their
software versions are not compatible (Ver. 1.06 or earlier version with
Ver 2.00 or later version).
Check the software version and use the correct combination.
GP-X
SERIES
Threaded type
0.197 in sensing For 10 mm 0.394 in
GP-X12ML GP-X22KL
0 to 5 mm 0 to 0.197 in 0 to 10 mm 0 to 0.394 in
2.362 × 2.362 × t 0.039 in
–4 to +158 °F
Brass (Nickel plated)
PA
long (Note 4)
45 g approx. 80 g approx.
+68 °F.
GP-XCOM
5 mA or less
Enclosure: ABS
Net weight: 20 g approx.
1030
FIBER
SENSORS
LASER
SENSORS
PHOTO-
ELECTRIC
SENSORS
sensing
MICRO
PHOTO-
ELECTRIC
SENSORS
AREA
SENSORS
LIGHT
CURTAINS
PRESSURE /
FLOW
SENSORS
INDUCTIVE
PROXIMITY
SENSORS
PARTICULAR
USE
SENSORS
SENSOR
OPTIONS
SIMPLE
WIRE-SAVING
UNITS
WIRE-SAVING
SYSTEMS
MEASURE-
MENT
SENSORS
STATIC
CONTROL
DEVICES
ENDOSCOPE
LASER
MARKERS
PLC /
TERMINALS
HUMAN
MACHINE
INTERFACES
ENERGY
CONSUMPTION
VISUALIZATION
COMPONENTS
FA
COMPONENTS
MACHINE
VISION
SYSTEMS
UV
CURING
SYSTEMS
Selection
Guide
Laser
Displacement
Magnetic
Displacement
Collimated
Beam
Digital Panel
Controller
Metal-sheet
Double-feed
Detection
GP-X
GP-A