Panasonic GP-X SERIES Specifications page 4

OPTIONS
Datalink between sensors possible
The controller communication unit GP-XCOM (optional) can be linked to up to 8 controllers and load via just one
RS-232C cable each controller settings and measurement data to a PC.
Controller communication unit
An intelligent monitor (GP-XAiM) optimal for collecting and analyzing measurement data
is also available
An intelligent monitor capable of the settings for each measurement
conditions and waveform display monitoring. It can perform waveform
monitoring, which could until now only be done by the oscilloscope, as
well as the simple loading and saving onto a PC of settings for each
condition and function. (Exclusive RC-232C cable is attached.)
BCD output unit GP-XBCD (Optional)
20 kHz high-speed data output
The measurement data can be processed quickly in the
PLC. (Sampling rate: 20 kHz)
Cable with connector on one end for
BCD output unit
GP-XBCC3 (Optional)
Cable length: 3 m
Controller side: BCD connector
Output side: Multi-core cable
4 types of measurement modes available
Measurement modes compatible to the most widely used
applications are available. Because of this, inputting
setting values can be done with ease. Please select the
most appropriate mode to suit your specific application.
<Stroke end sensing mode>
High Speed High Accuracy Eddy Current Type Digital Displacement Sensor
Maximum of eight units
Link cable
Mutual interference prevention function
The sensor head can be made interference prevention
by linking up to 8 controllers via an interference
prevention output cable and shifting the oscillation
timing. This enables precise measurements to be
obtained even in cases where many sensor heads are
crowded in the same area.
9.843 ft
Removable type terminal block
It is equipped with a removable
type European terminal block
very convenient during assembly,
when dividing the equipment into
GP-XBCC3
segments or when performing
BCD output unit maintenance. It also features
GP-XBCD
an reverse insertion prevention
construction.
4 types of selectable memory functions
The setting data can be processed in 4 types of memory
when measuring. This function enables either the changing
of the workpiece, the sensing of multiple products or
sensing after product changeover to be done smoothly.
<Maunally set mode>
<Rotation / eccentricity / vibration sensing mode>
GP-X
SERIES
Data sent to a PC
via the RS-232C
European terminal block
<Height sensing mode>
1026
FIBER
SENSORS
LASER
SENSORS
PHOTOELECTRIC
SENSORS
MICRO
PHOTOELECTRIC
SENSORS
AREA
SENSORS
LIGHT
CURTAINS
PRESSURE /
FLOW
SENSORS
INDUCTIVE
PROXIMITY
SENSORS
PARTICULAR
USE SENSORS
SENSOR
OPTIONS
SIMPLE
WIRE-SAVING
UNITS
WIRE-SAVING
SYSTEMS
MEASUREMENT
SENSORS
STATIC CONTROL
DEVICES
ENDOSCOPE
LASER
MARKERS
PLC /
TERMINALS
HUMAN MACHINE
INTERFACES
ENERGY CONSUMPTION
VISUALIZATION
COMPONENTS
FA COMPONENTS
MACHINE VISION
SYSTEMS
UV CURING
SYSTEMS
Selection
Guide
Laser
Displacement
Magnetic
Displacement
Collimated
Beam
Digital Panel
Controller
Metal-sheet
Double-feed Detection
GP-X
GP-A