RCA 25450 User Manual page 32

Using Your RCA 25450 Phone System
Manual Line Selection Dial (Base Unit)
The manual line-selection function allows you to choose a phone line to make a call.
1. Press a Line button (1-4).
NOTE: To cancel at any time, press the Speaker button or return the Handset to the Cradle.
2. If the phone line selected is not connected or is in use, it will show "Line (1-4)
is not available". If the phone line selected is dedicated to a Cordless Handset, it
will show "Line (1-4) is dedicated to ext # (01 – 16)". If the phone line selected
is available but system resources such as voice channel are not available, it will
show "System busy".
3. Otherwise, the phone will enter talk mode and the display will show "Press
REDIAL or dial number" or the dialing prefix if it is enabled via phone setting
menu. To use the Handset, lift it from the cradle. If the Handset is in the cradle,
the speakerphone will be turned on.
4. Press the Redial button to redial the last number called, or enter the phone num-
ber using the keypad (0–9, *, #).
Pre-Dialing (Base Unit)
The pre-dial function allows you to enter the number before accessing a phone line.
1. To pre-dial a number, enter the phone number using the keypad (0–9, *, #) while
in Standby Mode.
2. Use the and
soft button erases the last digit entered. The
erases the whole number but remains in the dialing mode.
3. Press the Dial, Speaker, or Headset button (when a Headset is plugged in), or
pick up the handset (off-hook) to make an auto-line selection dial; or press Line
(1-4) to make a manual line selection dial.

soft buttons to edit the number entered. The
soft button