Screening Calls At The; Remote Access - GE 21026 User Manual

To erase all previously reviewed messages:
When the base is in standby mode, press and hold the erase button for
three seconds to erase all previously played messages. You will hear a
confirmation tone, and the message indicator flashes the number or
messages not yet reviewed.
S C
CREENING ALLS AT THE
You may screen incoming calls by waiting for the caller to begin leaving a
message (to hear who it is), then pick up the handset, and press talk/
callback to speak to caller. The answering system automatically stops
recording when you activate the handset or pick up an extension phone.
TIP: Make sure the volume on the base is set loud enough for you to hear
incoming calls.
S C
CREENING ALLS WITH THE
You may use the cordless handset to remotely screen calls.
1. Wait for the caller to begin leaving a message (to hear who it is).
2. Press the exit/answerer button to access the answering system.
3. Listen as the caller leaves a message.
4. Press the talk/callback button to speak to the person or press exit/
answerer button to stop screening the call.
R A
EMOTE CCESS
This section explains how to use the cordless handset, or any touch tone
phone, to access the answering system with your 3-digit security code.
TIPS: If you access the answering system with any other touch-tone phone, a
voice menu guides you through the steps.
B
ASE
C H
ORDLESS ANDSET
43