Table of Contents
Advertisement
Starting with the SmartKey
Make sure the automatic transmission
is set to P.
The transmission position indicator in
the multifunction display should be
on
P
( page 153).
Do not depress the accelerator.
Turn the SmartKey in the starter switch
to position 3 ( page 41) and hold until
the engine starts.
i
You can also use the "touch-start" function.
Turn the SmartKey to position 3 and release it
again immediately. The engine then starts auto-
matically.
For information on turning off the engine
with the SmartKey, see "Turning off the en-
gine" ( page 67).
Starting with KEYLESS-GO*
Warning!
As long as the SmartKey with KEYLESS-GO
is in your vehicle, the vehicle can be started.
Therefore, never leave children unattended
in the vehicle, as they could otherwise acci-
dentally start the engine.
When leaving the vehicle, always take the
SmartKey with KEYLESS-GO with you and
lock the vehicle. Do not leave children unat-
tended in the vehicle, or with access to an
unlocked vehicle.
You can start your vehicle without the
SmartKey in the starter switch using the
KEYLESS-GO start/stop button in the
starter switch.
The SmartKey with KEYLESS-GO must be
located in the vehicle.
G
KEYLESS-GO start/stop button
1 USA only
2 Canada only
Make sure KEYLESS-GO start/stop
button 1 is inserted in the starter
switch ( page 43).
i
If you wish to start the engine using the
SmartKey instead of the KEYLESS-GO feature,
remove the KEYLESS-GO start/stop button from
the starter switch ( page 43).
Getting started
Driving
57
Hide quick links:
Advertisement
Table of Contents
