Instrument Cluster; Adjusting Instrument Cluster Illumination - Mercedes-Benz GL450 Operator's Manual

Instrument cluster

For a full view illustration of the instrument
cluster, see "Instrument cluster"
( page 26).
1 To dim instrument cluster illumination
2 Reset button
3 To brighten instrument cluster
illumination
The instrument cluster is activated when
you
open a door
switch on the ignition ( page 42)
press reset button 2
switch on the exterior lamps
( page 141)
You can change the instrument cluster
settings in the instrument cluster submenu
of the control system ( page 170).
Warning!
No messages will be displayed if either the
instrument cluster or the multifunction
display is inoperative.
As a result, you will not be able to see infor-
mation about your driving conditions, such
as speed or outside temperature, warn-
ing/indicator lamps, malfunction/warning
messages or the failure of any systems.
Driving characteristics may be impaired.
If you must continue to drive, do so with
added caution. Contact an authorized
Mercedes-Benz Light Truck Center as soon
as possible.
Controls in detail
Instrument cluster
Adjusting instrument cluster illumina-
tion
Use button 1 or 3 to adjust the illumina-
G tion brightness for the instrument cluster.
i
The instrument cluster illumination is
dimmed or brightened automatically to suit am-
bient light conditions.
The instrument cluster illumination will also be
adjusted automatically when you switch on the
vehicle's exterior lamps.
To brighten illumination
Press and hold button 3 until the
desired level of illumination is reached.
To dim illumination
Press and hold button 1 until the
desired level of illumination is reached.
151