Philips 32HFL5007D/10 Installation Manual page 11

Frequency step size has two options:
1. "1 MHz" – With Full scan, the step size to search for channels is 1 MHz. The scan will take more time but
will find also channels broadcasted not according to the channel grid.
2. "8 MHz (default)" – With Full scan, the step size to search for channels is 8 MHz. The scan will be shorter
in time but some channels which are not in the expected channel grid (local head-end) will not be found.
When details of the local network are known they can be filled out in this menu. If the details are not known leave
everything as the default values.
Digital channels – Allows the TV to search for digital channels. If the TV doesn't find any DVB channels this means the
option is set on OFF. This option is available only if you select country "Other". For most cases this option is replaced
by Analog channels option (On - OFF).
LCN sorting: With the LCN function (Logical Channel Number), the channel list is ordered automatically. This function
can be disabled and the TV will not change channel order according to the LCN table.
Note: Only applicable if this is supported on the local network.
The "Reset" option will reset the search settings to default. After you have checked or changed settings, you can
select "Done" and select "Start" to start the channel search.
10