Loudspeaker Setup - Bang & Olufsen BeoVision 9 Manual

50
Select speaker setup
Switch on the TV in TV or Home cinema mode
before you adjust speaker settings for either
mode.
Set speaker type
Register the type of each speaker in the menu.
Each Bang & Olufsen speaker makes a sound and
is highlighted on the screen.
Set speaker role
Select the function for each connected
loudspeaker, such as front, back or surround. A
speaker can have more than one role – one for TV
viewing and one for Home cinema viewing.
Information
Sound during setup During the setup process, a sound is sometimes produced by a speaker. Check
if the highlighted speaker matches the name of the speaker making the sound.
Speaker roles
You must select the surround speakers before you can select the back
speakers.

Loudspeaker setup

Add Power Link speakers and up to two BeoLab subwoofers to your TV and you
have a surround sound system.
Switch on TV and bring up 'TV
SETUP' menu
Select 'SPEAKER TYPES' menu
Select 'SPEAKER ROLES' menu
B
1
C
D
E
Set speaker role.
Select 'SOUND' in 'OPTIONS'
menu
Select speaker and reveal
speaker type
Reveal speaker role for each
speaker
TV (1)
A: Right front
A
B: Left front
C: Off
D: Off
E: Left back
G
F: Right back
G: Off
F
NOTE! To make a Home cinema setup, you must
first switch to Home cinema mode. For
information about Home cinema, see p. 22.
Select menu
Accept
Accept
Home cinema (2)
Left front
Left surround
Left back
Right back
Right surround
Right front
Centre