Tuner Setup - Bang & Olufsen BeoVision 9 Manual

Disable the internal tuner
If you disable the TV tuner, you can activate a
connected peripheral unit with the TV button.
If you disable the ATSC tuner, you can activate
a connected peripheral unit with the DTV
button. In this menu you can also scan in
channels or identify a cable box you may have
connected to the TV.
1
*'TV TUNER' If you select 'CABLE BOX', follow the on-screen information to specify
settings which cable box you have connected to the TV. If you select 'ANTENNA' or
'CABLE', a scanning process begins when you store the setting.
Disable TV/ATSC
If you disable both the TV tuner and the ATSC tuner, you can activate a
tuner peripheral unit acting as tuner with either the TV button or the DTV
button.

Tuner setup

Disable the TV or ATSC tuner, if your TV or ATSC source is a peripheral unit,
such as a set-top box.
Select 'TUNER
Bring up 'TV SETUP'
SETUP' in
menu
'OPTIONS' menu
TV TUNER
Contents of the
'TUNER SETUP' menu
ATSC
Select 'TV TUNER'
Disable/enable 'ATSC'
and make
and accept
1
settings*
Register the source of your TV video signal. It
is not required during first-time setup. Options
are 'CABLE', 'CABLE BOX', 'ANTENNA', and
'OFF'
Disable/enable the ATSC tuner
NOTE! For more information about the 'TUNER
SETUP' menu and about scanning TV channels,
see 'Scan in TV channels' on p. 26.
35