Edit Scanned Tv Channels - Bang & Olufsen BeoVision 9 Manual

Remove a channel
Remove channels from the channel list. If you
wish, you can restore channels that you have
removed.
Name a channel
You can name the TV channels.
Fine tune channel
Fine tune channels, if, for example, you wish to
adjust the frequency.
Re-scan TV channels
Add new channels or update scanned channels
which, e.g., have been moved by the
broadcaster. If you only wish to check for a new
signal on a scanned channel that has been
empty, do not re-scan all channels. Instead,
select the channel in the channel list using the
number buttons. See 'Watch television' on p. 4.
1
*Video signal If you select 'CABLE' or 'ANTENNA', scanning begins immediately. If you
select 'CABLE BOX', register the cable box. See 'Identify the cable box'
on p. 26.
'EDIT CHANNELS'/ If you select 'CABLE BOX' or 'OFF' for 'TV TUNER' in the 'TUNER SETUP'
'FINE TUNE' menu, the 'EDIT CHANNELS' and 'FINE TUNE' menus are inaccessible.
Re-scan
If you re-scan all channels, all channel settings you have made disappear.

Edit scanned TV channels

Remove channels you do not use, name and fine tune channels, or re-scan to
find new channels.
Select 'EDIT
Bring up 'TV SETUP' CHANNELS' in
menu 'CHANNEL SETUP'
menu
Select 'EDIT
Bring up 'TV SETUP' CHANNELS' in
menu 'CHANNEL SETUP'
menu
Select 'FINE TUNE'
Bring up 'TV SETUP'
in 'CHANNEL
menu
SETUP' menu
Bring up 'TV SETUP' Highlight 'TV
menu and select TUNER' in 'TUNER
'OPTIONS' SETUP' menu
Select channel
Remove/add
Follow on-screen
Select channel
instructions
Select 'CHANNEL'
Fine tune and select
and select channel sound type
Select source of
Scanning begins/
video signal and
identify cable box*
accept
NOTE! Removed channels are skipped when
you step through channels using the arrow
buttons on the remote control, but can still be
selected in the channel list by pressing the
channel number.
27
1