Surround Sound And Home Cinema - Bang & Olufsen BeoVision 9 Manual

22
Select speakers for movie sound
The TV automatically selects the optimal sound,
when you select a source, but you can select an
available speaker combination that suits the
source you are using yourself.
Select picture format
The TV automatically adapts the picture to fill
out as much of the screen as possible, when
you select a source, but you can select a format
yourself.
Switch to Home cinema
Move the picture from the TV screen onto a
connected projector screen.
Useful hints
1
*Scene menu Display FORMAT for picture formats and Home cinema and SPEAKER
for speaker combinations on Beo4.
2
*Optimise and The speaker combination or the picture format is optimised if you press
Variation Optimise on Beo5. On Beo4 press GO. With each press on Variation
on Beo5, you select a variation of Standard. On Beo4 use
Switch mode To switch between Home cinema and TV mode on Beo4, press LIST until
FORMAT is displayed then press 0.

Surround sound and Home cinema

When you add Bang & Olufsen loudspeakers and a projector, you can turn your
TV into a Home cinema system with surround sound. You can also select a
picture format to customise the viewing experience.
Bring up Scene Select Speaker
1
display on Beo5* display
Mode 1 Mode 2
Bring up Scene Select Picture
1
display on Beo5* display
Standard
For panoramic
view or 4:3
Bring up Scene Select Cinema
1
display on Beo5* display
Select speaker combination*
Mode 3 Mode 4
2
Select format*
Zoom
The picture is
adjusted vertically
Select Cinema to switch between Home
cinema and TV mode
NOTE! If you have added only two front speakers
to the TV, you will only be able to choose
Mode 1–3. You can add up to two BeoLab sub-
woofers to your TV.
or .
2
Mode 5
Adjust picture up or
down
Wide
For genuine 16:9
widescreen
pictures