Advice On Setting Up - Bang & Olufsen Beo4 User Manual

Advice on setting up

Setup
1 Tuning
2 Sound
3 Picture
4 Stand
5 Source
6 Menu
7 Clock
8 V.Tape
From the BeoVision Avant Setup menu, you can
call up the various menus for tuning in and
presetting. See the items in the Setup menu
below...
1 Tuning... Gives access to tuning in TV stations,
(satellite stations) and the Video tape
recorder.
2 Sound... Gives access to adjusting sound.
3 Picture... Gives access to adjusting the picture.
4 Stand... Gives access to presetting your
favourite viewing angles for the
motorised stand.
5 Source... Calls up the AV Source menu in which
you must register any extra video
equipment you connect to the BeoVision
Avant AV socket.
6 Menu... Gives access to switching the menu
guidance function On or Off as you prefer
it.
7 Clock... Gives access to setting the built-in
clock.
8 V.Tape... Calls up the V.Tape access menu
which allows you to call up special V.Tape
menus for adjusting the video picture and
the video tape recorder's basic setup
menu in which you must register your
preferences for the video tape recorder.
When you want to start tuning in your
BeoVision Avant, you call up the main
menu first, then the Setup menu which
allows you to call up the Tuning menu.
Continue to preset the system after
you have tuned in your stations. Set
the clock, and if you wish set stand
positions and enter your personal
preferences for the system, item, 4,5,6,
and 8 in the Setup menu.
Adjusting the sound and picture levels,
items 2 and 3, is also possible. The
preset neutral sound and picture levels
do, though, suit most situations and
environments.
Press to call up the main menu
Press to call up the Setup menu
If Sat is available Setup will be item
5 instead of 4
M
Alternatively, use to light up
Setup and press GO to call up the
Setup menu
The Setup menu appears...
Use the number keys to choose one
of the items and call up their
respective menus...
Most of the menus you call up from
the Setup menu e.g. the Picture
menu are fill-in menus, though e.g.
the first Tuning access menu requires
you to choose yet another item e.g.
TV in order to call up a fill-in menu
Press to key in information for the
item
Press to reveal options for the items
in the menu e.g. start tuning
Press to move from item to item in
the menu
Continue to fill in all the information
needed in the menu...
...press GO to accept it
7
MENU
then
4
0
through
9
or
or
then
t t
or
s s
GO