Picture-In-Picture - Bang & Olufsen Beo4 User Manual

36
Press LIST until P-IN-P* is displayed
LIST
on the Beo4 display
then
Select the source you want to see in
TV
the small picture
or
V TAPE
or
SAT
Beo4 remote control commands will now be
directed to the small picture
Press LIST until P-IN-P* is displayed
LIST
then
Moves the small picture to the
respective corner on the TV screen
or
or
or
Swaps the large and the small
0
pictures around
Your commands is directed to the
small picture – the sound always
follows the large picture
Press the button for the source you
TV
wish to see to stop the picture-in-
or
picture function
V TAPE
or
SAT
*Note: If P-IN-P is not available, you must add it
to the Beo4 list of functions, see Extra functions in
Beo4, page 67 in this guide.
P I C T U R E - I N - P I C T U R E
Watching two programmes simultaneously...
The picture-in-picture function enables
you to see two programmes on screen
simultaneously, for example two
different TV programmes, a TV and a
satellite programme, a video tape
playback and a TV programme, etc...
While you are watching e.g. TV, you
can prompt your BeoVision Avant to
insert a small picture on the screen of
the source and program number you
then choose.
The sound in the loudspeakers always
follows the large picture, but your
remote control commands will all be
directed to the small picture.
You can move the small picture to any
corner of the screen – just press the
coloured button pointing in the
direction you desire.
Please note...
The picture-in-picture function requires that
your BeoVision Avant is equipped with a
picture-in-picture module.