Figure 89. Identify Device Information. (Part 4 Of 7) - IBM IC25N040ATCS04 - Travelstar 40 GB Hard Drive Specifications

Word Content
83 49A8H
84 4003H
85 F4XXH
* in Content field indicates the use of those parameters that are vendor
specific.
** indicates a feature that is able to be unsupported by the Device
Configuration Overlay command.

Figure 89. Identify device information. (Part 4 of 7)

Description
Command set supported
15(=0) Always
14(=1) Always
13-12(=0) Reserved
11(=1) 1=Device Configuration Overlay command
supported
10- 9(=0) Reserved
*
** 8(=1) 1=SET MAX security extension supported
** 7(=1) 1=Address Offset feature supported
6(=0) 1=SET FEATURES subcommand required to spin-up
5(=1) 1=Power-Up In Standby feature set supported
4(=0) 1=Removable Media Status Notification Feature
Set supported
3(=1) 1=Advanced Power Management Feature Set
supported
2(=0) 1=CFA Feature Set supported
1(=0) 1=READ/WRITE DMA QUEUED supported
0(=0) 1=DOWNLOAD MICROCODE command supported
Command set/feature supported extension
15(=0) Always
14(=1) Always
13- 2(=0) Reserved
** 1(=1) 1=SMART self-test supported
** 0(=1) 1=SMART error logging supported
Command set/feature enabled
15(=1) Reserved
14(=1) 1=NOP command supported
13(=1) 1=READ BUFFER command supported
12(=1) 1=WRITE BUFFER command supported
11(=0) Reserved
**10(=1) 1=Host Protected Area Feature Set supported
9(=0) 1=DEVICE RESET command supported
8(=0) 1=SERVICE interrupt enabled
7(=0) 1=release interrupt enabled
6(=X) 1=look-ahead enabled
5(=X) 1=write cache enabled
4(=0) 1=supports PACKET Command Feature Set
3(=X) 1=supports Power Management Feature Set
2(=0) 1=supports Removable Media Feature Set
1(=X) 1=Security Feature Set enabled
0(=X) 1=S.M.A.R.T. Feature Set enabled
Travelstar 60GH & 40GN hard disk drive specifications
126