Outline Of The Drive - Hitachi 5K100 - Travelstar - Hard Drive Specifications

2.0 Outline of the drive

• 2.5 inch, 9.5-mm height
• Formatted capacities of 100 GB, 80 GB, 60 GB, 40 GB, 30GB, 20 GB
• 512 bytes/sector
• AT Interface (Enhanced IDE) conforming to ATA/ATAPI-6
• Integrated controller
• No-ID recording format
• Coding : 100/106
• Multi zone recording
• Enhanced ECC On-The-Fly
• 10 bit 40 symbol non Interleaved Read Solomon code
• Non interleave On-The-Fly correction
• Included 2 symbol system ECC
• Segmented Buffer with write cache –8192 KB (Upper 417 KB is used for firmware)
• Fast data transfer rate – up to 100 MB/s
• Media data transfer rate (max): 493 Mb/s
• Average seek time: 12 ms for read
• Closed-loop actuator servo (Embedded Sector Servo)
• Rotary voice coil motor actuator
• Load/Unload mechanism
• Mechanical latch
• 0.65 Watts at idle state
• Adaptive power save control - 0.65 Watts at idle state
• Power on to ready - 3.5 sec
• Operating shock:
• 2940 m/sec
• 1568 m/sec
• Non-operating shock: 9810 m/sec
2
(300 G)/2ms
2
(160G)/1ms
2
(1000 G) 1ms
Travelstar 5K100 Hard Disk Drive Specification
5