2.0 General features of the drive
•
Formatted capacities of 40 GB - 250 GB
•
Spindle speeds of 7200 RPM
•
Fluid Dynamic Bearing motor
•
Enhanced IDE interface
•
Sector format of 512 bytes/sector
•
Closed-loop actuator servo
•
Load/Unload mechanism, non head disk contact start/stop
•
Automatic Actuator lock
•
Interleave factor 1:1
•
Seek time of 8.5 ms (40-GB, 80-GB models), 8.2 ms (120GB, 160GB and 250GB) typical without Com-
mand Overhead
•
Sector Buffer size of 2048 KB and 8192 KB (Upper 260 KB is used for firmware)
•
Ring buffer implementation
•
Write Cache
•
Queued feature support
•
Advanced ECC On The Fly (EOF)
•
Automatic Error Recovery procedures for read and write commands
•
Self Diagnostics on Power on and resident diagnostics
•
PIO Data Transfer Mode 4 (16.6 MB/s)
•
DMA Data Transfer
• Multiword mode Mode 2 (16.6 MB/s)
• Ultra DMA
•
CHS and LBA mode
•
Power saving modes/Low RPM idle mode (APM)
•
S.M.A.R.T. (Self Monitoring and Analysis Reporting Technology)
•
Support security feature
•
Quiet Seek mode (AAM)
•
48-bit addressing feature
Mode 5 (100 MB/s)
Deskstar 7K250 Hard Disk Drive specification
5