ZHU36RSM
GE Monogram
Dimensions and Installation Information (in inches)
1-3/4"
Min.
D
2-1/2"
Min.
to Front
Edge
Dimensions:
36" Models
A
ZHU36RSM
36-1/8"
Electrical requirements
Product rating is 120/240V, 60Hz, 36" cooktops
require a 50-amp circuit. The cooktops must
be connected to a supply circuit of the proper
voltage and frequency and protected by a time-
delay fuse or circuit breaker.
All models require 12"
minimum clearance below the
cooktop bottom to combustible
materials.
The cooktop bottom has air
intake ports toward the front
that help cool the components.
Do not install a shelf or
partition beneath the cooktop
that is more than 18" deep.
For answers to your Monogram,
GE
appliance questions, visit our website at
®
ge.com or call GE Answer Center
800.626.2000.
36" Induction Cooktop
®
A
B
C
B
(depth at sides)
(depth at center)
20-15/32"
21"
269Dia1
GE Profile
or
®
™
service,
®
2" Min.
to Side Walls
B
C
D
33-7/8"
19-1/8"
Note: When the cooktop is installed over an oven, the baffle at
the front is not required.
Combination installations
Consideration must be given to electrical supply locations
when the cooktop is installed with other products in the same
cabinet. Always refer to each product's installation instructions
for clearances and electrical requirements.
• Install these cooktops with any exhaust hood of the same
or treater width; 300 CFM or greater air flow rating is
recommended.
• This 36" cooktop may be installed in combination with
a Monogram
for details.
• A Monogram single oven (except Trivection oven) may be
installed below these cooktops.
The serial plate is located on the bottom of the cooktops.
Junction
3-1/4"
557ZEU669
36" downdraft vent. See downdraft vents
®
Specification Revised 09/08
16" Min
Box
4-5/8" at
Front Baffle
Listed by
Underwriters
Laboratories
130253
Need help?
Do you have a question about the Monogram ZHU36RSMSS and is the answer not in the manual?
Questions and answers