Table of Contents
Advertisement
Making corrections during input
To delete a character at the cursor, make the character underlined
by using [
] or [
delete the character.
To replace a character, make the character underlined by using [
or [
] to move the cursor, and then enter a new entry to replace the
character.
To insert a character, move the cursor to the position of the
character where you want to insert, it will be inserted in the front of
the character after pressing [ 2nd ] [ INS ] and entering a new
character.
(Note) : The blinking cursor "
mode. On the contrary, the blinking cursor is displayed
as " _ " and it means the calculator is in overwrite mode.
To clear all characters, clear all input character by [ CL ] key.
Replay function
This function stores the latest operation executed. After execution
is complete, pressing [
from the beginning or the end. You can continue moving the
cursor by [
in overwrite mode, just type over the digit). See Example 1.
The replay function can keep input digits up to 254 characters for
SRP-285II. After execution is complete or during entering, you can
press either [
values or commands for subsequent execution. See Example 2.
(Note) : The replay function isn't cleared even when [ CL ] is
pressed or power is turned off, so contents can be
recalled even after [ CL ] is pressed. However, replay
function is cleared when mode or operation is switched.
Error Position Display Function
When a mathematically illegal calculation is performed, error
position display function will tell you with the cursor where the
error is. Press [
correct entry. You can also clear an error by pressing [ CL ] and
then re-entered the values and expression from the beginning.
See Example 3.
Memory Calculation
Press [ M+ ] to add a result to running memory. Press [ 2nd ] [ M– ]
to subtract the value from running memory. To recall the value in
running memory, press [ MRC ]. To clear running memory, press
[ MRC ] twice. See Example 4.
] to move the cursor, and then press [ DEL ] to
] or [
] or [
] to edit it. To delete a digit, press [ DEL ]. ( or,
] or [
] to display previous input steps and edit
] or [
] to move the cursor and then give it a
E – 6
" means the calculator is in insert
] key will display the operation
]
Hide quick links:
Advertisement
Table of Contents
