Angle Unit Conversion - Citizen SRP-285II User Manual

To enter a mixed number, enter the integer part, press [ A
enter the numerator, press [ A
enter an improper fraction, enter the numerator, press [ A
enter the denominator. See Example 28.
During a fraction calculation, if the figure is reducible, a figure is
reduced to the lowest terms after pressing a function command
key ( [ + ], [ – ], [ x ] or [
b
[ 2nd ] [ A /
c
improper fraction and vice versa. See Example 29.
To convert between a decimal and fractional result, press [ 2nd ]
[ F D ] and [
Calculations containing both fractions and decimals are calculated
in decimal format. See Example 31.

Angle Unit Conversion

The angle units ( DEG , RAD , GRAD ) is set by pressing [ DRG ] to
display the angle menu. The relation among the three angle units
is :
Angle conversations ( See Example 32. ) :
1. Change the default angle settings to the units you want to
convert to.
2. Enter the value of the unit to convert.
3. Press [ DMS ] to display the menu. The units you can select
are ° (degrees),
(gradians) or
4. Choose the units you are converting from.
5. Press [
To convert an angle to DMS notation, select " DMS " which
converts an entry to DMS notations, i.e., where 1 30 0
represents 1 degrees, 30 minutes, 0 seconds. See Example 33.
To convert a DMS notation to decimal, select
(minutes), (seconds). See Example 34.
b
/
] ) or the [
d
/ ], the displayed value will be converted to the
e
]. See Example 30.
180 = π rad = 200 grad
(minutes),
DMS (Degrees-Minutes-Seconds).
] twice.
E – 13
], and enter the denominator ; To
c
(seconds), r (radians), g
b
/
b
/ ], and
c
] key. By pressing
(degrees),
],
c