Edimax BR-6428nS User Manual page 67

ESSID
Channel Number
Associated Clients
MAC address 1 to 4
Set Security
11Mbps for 802.11b clients, and maximum
54Mbps for 802.11g clients).
2.4 GHz (G): 2.4GHz band, only allows 802.11g
wireless network client to connect this router
(maximum transfer rate 11Mbps).
2.4 GHz (B+G+N): 2.4GHz Band, Allows
802.11b, 802.11g, and 802.11N wireless
clients. It's recommends to select this band to
maximize compatibility.
This is the name of broadband router. You can
type any alphanumerical characters here,
maximum 32 characters. ESSID is used to
identify your own broadband router from
others when there are other broadband
routers in the same area. Default SSID is
'default', it's recommended to change default
ESSID value to the one which is meaningful to
you, like myhome, office_room1, etc.
Select the channel number you wish to use; all
access points must use the same channel.
Click 'Show Active Clients' button to show
the list of all connected wireless clients. You
can click 'Refresh' in new window to get
latest list again, or click 'Close' to close the
window.
Please note that if you have pop‐up blocker
installed, you may have to disable it or tell
your pop‐up blocker to allow the popup
window, or you will not be able to see the
wireless client list window.
Input the MAC address of other wireless
access points (the access points you wish to
connect).
Click 'Set Security' button to set security
functions of this wireless connection to
improve security. Please refer to chapter
3‐2‐1‐7 for detailed instructions.
66