Display Explanations; Installing Batteries - Health O Meter 7631 User Manual

Display Explanations

Display:
Icons:

Installing Batteries

1. Press down and lift the battery cover in the direction of the arrow
to open the battery compartment.
2. Install or replace 4 "AA" 1.5 Volt batteries in the battery compartment
according to the battery direction indicators molded on the inside of
the compartment.
3. Replace the battery cover by inserting the bottom tabs first, then push in
the top clip of the battery door until it engages.
No. of Memory Sequence
Appears when measurement value is stored
in memory or is recalled from memory
Appears when batteries should be replaced
min.
Shows the Pulse Rate per minute
Occurs when an error was made during
measurement
Systolic Pressure
Diastolic Pressure
Pulse Rate
7